Enum ExposureClassEc2
- Namespace
- IdeaRS.OpenModel.Concrete
- Assembly
- IdeaRS.OpenModel.dll
Type of exposure class
public enum ExposureClassEc2Fields
X0 = 0-
No risk of corrosion or attack - very dry
XA1 = 15-
Chemical attack - slightly aggressive chemical environment according to EN 206-1, Table 2
XA2 = 16-
Chemical attack - moderately aggressive chemical environment according to EN 206-1, Table 2
XA3 = 17-
Chemical attack - highly aggressive chemical environment according to EN 206-1, Table 2
XC1 = 1-
Corrosion induced by carbonation - dry or permanently wet
XC2 = 2-
Corrosion induced by carbonation - wet, rarely dry
XC3 = 3-
Corrosion induced by carbonation - moderate humidity
XC4 = 4-
Corrosion induced by carbonation - cyclic wet and dry
XD1 = 5-
Corrosion induced by chlorides - moderate humidity
XD2 = 6-
Corrosion induced by chlorides - wet, rarely dry
XD3 = 7-
Corrosion induced by chlorides - cyclic wet and dry
XF1 = 11-
Freeze/Thaw Attack - moderate water saturation, without de-icing agent
XF2 = 12-
Freeze/Thaw Attack - moderate water saturation, with de-icing agent
XF3 = 13-
Freeze/Thaw Attack - high water saturation, without de-icing agents
XF4 = 14-
Freeze/Thaw Attack - high water saturation with de-icing agents or sea water
XS1 = 8-
Corrosion induced by chlorides from sea water - exposed to airborne salt but not in direct contact with sea water
XS2 = 9-
Corrosion induced by chlorides from sea water - permanently submerged
XS3 = 10-
Corrosion induced by chlorides from sea water - tidal, splash and spray zones